US goalie leg pads
Warrior goalie pad size chart
Warrior floor-to-knee ranges control base pad size. Published height anchors are advisory cross-checks, and thigh-rise availability is a separate discrete mapping.
Published size chart
Measurements below reproduce reviewed published rules in their source-native units.
Scroll the chart horizontally on smaller screens. An exact anchor is a single published value, not a height band.
| Size | Category | Floor to knee | Height (advisory anchor) |
|---|---|---|---|
| 30" | Not specified by manufacturer | 17.75–18.25 in | 60 in |
| 31" | Not specified by manufacturer | 18.25–18.75 in | 64 in |
| 32" | Not specified by manufacturer | 18.75–19.25 in | 66 in |
| 33" | Not specified by manufacturer | 19.25–19.75 in | 68 in |
| 34" | Not specified by manufacturer | 19.75–20.25 in | 70.5 in |
| 35" | Not specified by manufacturer | 20.25–20.75 in | 72 in |
| 36" | Not specified by manufacturer | 20.75–21.25 in | 73.5 in |
| 37" | Not specified by manufacturer | 21.25–21.75 in | 75 in |
| 38" | Not specified by manufacturer | 21.75 in and above | 75 in and above |
How to read this Warrior chart
- Use floor-to-knee for the base size; do not make height the controlling measurement.
- A different printed height anchor is advisory information only and never erases the FTK base match. Unlisted heights are explicitly unassessed.
- A blank extension cell means no reviewed value was published; an explicit N/A means the reviewed chart says that extension is unavailable.
A numerical example from this chart
Consider these illustrative values: floor to knee: 20 in; standing height (advisory anchor): 70.5 in. They are inside the published row for size 34". Another row may also match at an inclusive boundary.
This example explains the chart, not a physical fitting. Warrior uses FTK for base size. Height is advisory, and any thigh-rise extension must be checked separately for that specific base size.
Enter your measurements for Warrior. Confirm knee-block landing in your actual skates and knee protection before use.
Measure before choosing
Use the measurement method named in the table. Different methods are not interchangeable.
Sources and fit safety
Every row retains its reviewed source reference and review date in the published data. Manufacturer charts are a starting point; model geometry, boot angle and stance still require an on-pad knee-block check.
Compare the supported brand charts or read the review methodology.